Description
The luReportStyle lookup table is used to:
- Set the field width and character styles used (font and so on) when teachers enter:
- comments
- topic comments, in Student Results Maintenance in Synergetic.
- Set restrictions about the number of characters, lines and words entered.
- Determine whether to:
- allow printing of individual classes
- control the printing of individual classes based on a tutor group.
- Define the list of Crystal Reports that assessment codes are linked to for different report output styles.
- Determine whether the Crystal Report is responsible for its own grouping of the classes.
The report style is used in the Report Style field on the Summary sub-tab of Subject Assessment Maintenance. See Subject Assessment Maintenance - Summary tab - Summary sub-tab in the Assessments and reports manual. For example, results for the two German A classes (GEEA1 and GEEA2) are entered based on the A5 Style set for the German A subject assessment.
anchor
.gif)
ExamplesAnchor
.gif)
.gif)
.gif)
Fields
Field | Description | ||||||
|---|---|---|---|---|---|---|---|
Code | Unique code used to identify the report style. | ||||||
Description | Description as it appears on the Report Style field on the Summary sub-tab of Subject Assessment Maintenance. O_19463 |
See Subject Assessment Maintenance - Summary tab - Summary sub-tab in the Assessments and reports manual. | |||||
CommentWidthMM | Width of the comment box in Student Results Maintenance. This affects how the comments are formatted on the report. For example, an A5 piece of paper is 148 mm wide. The value for the A5 Style is 125 mm; which fits neatly when printed on A5 paper.
By contrast, the CommentWidthMM field has been set to 50 in the following example. The box is narrower than the example above.
Also applies to TopicCommentWidthMM. Note: We recommend this field is set to match the settings of the relevant Crystal Reports, so that teachers entering comments can see how they will look when printed. | ||||||
CommentFont-NameCommentFontName | Font style used when entering comments. Arial is used when no style is specified. Note: If you specify a non-standard font, you need to make sure that it is installed on your PC. Also applies to TopicCommentFontName. Note: We recommend this field is set to match the settings of the relevant Crystal Reports, so that teachers entering comments can see how they will look when printed. | ||||||
CommentFont-PointSizeCommentFontPointSize | Font size used when entering comments. Size 10 is used where no size is specified. In the following example, the font is 10 point.
O_21500 | O_21500 | .gif) By contrast, the point size has been set to 8 in the following example. It is also bold and italicised, as detailed later.
Tip: Specify a point size that most parents and guardians can read. In the example above, 8 is probably too small for most people to read comfortably. Also applies to TopicCommentFontPointSize. Note: We recommend this field is set to match the settings of the relevant Crystal Reports, so that teachers entering comments can see how they will look when printed. | ||||
CommentFont-ItalicFlagCommentFontItalicFlag | Select the field to enter the comments in an italicised font. The field is cleared by default. In the following example, the text is displayed in an italicised font. It is also in a font size of 8 and bold, as detailed for other settings.
Also applies to TopicCommentFontItalicFlag. Note: We recommend this field is set to match the settings of the relevant Crystal Reports, so that teachers entering comments can see how they will look when printed. | ||||||
CommentFont-BoldFlagCommentFontBoldFlag | Select the field to enter the comments in a bold font. The field is cleared by default. In the following example, the text is displayed in a bold font. It is also italicised and set to a font size of 8, as described above.
.gif) Also applies to TopicCommentFontBoldFlag. Note: We recommend this field is set to match the settings of the relevant Crystal Reports, so that teachers entering comments can see how they will look when printed. | ||||||
CommentWeb-MaxCharactersCommentWebMaxCharacters | Maximum number of characters that teachers are restricted to, when entering comments on the Results Maintenance window in SynWeb. See Maintaining student results in the SynWeb Assessments and reports manual. | ||||||
CommentLines | Maximum number of lines of comments that teachers are restricted to, when entering comments on the Student Results Maintenance window. See Maintaining student results in the Assessments and reports manual. In the following example, an error message is displayed because the limit has been exceeded. The comments have to be adjusted before the student results can be saved. O_19464 | O_19464
The default value is 0 (zero) which places no restrictions on the teacher's comments. Also applies to TopicCommentLines. | |||||
PrintFlag | You can use the PrintFlag field to either:
Allowing printing of individual classes Select this field to allow a print job to be issued for any class using this report style. Controlling the printing of individual classes based on a tutor group If a tutor class is defined and is responsible for printing all others:
Note: Reports can still be previewed using Student Results Maintenance. If cleared, this code can be used as a grouping or reference code in advanced combined Crystal Reports. Warning: Take care when changing existing settings. If in doubt speak to your Crystal Reports specialist. | ||||||
CommentWords | Maximum number of words that teachers are restricted to, when entering comments on the Student Results Maintenance window. See Maintaining student results in the Assessments and reports manual. In the following example, an error message is displayed because the limit has been exceeded. The comments have to be adjusted before the student results can be saved. O_19465 | O_19465 | .gif) The default value is 0 (zero) which places no restrictions on the teacher's comments. Also applies to TopicCommentWords. Note: We recommend this field is set to match the settings of the relevant Crystal Reports, so that teachers entering comments can see how they will look when printed. | ||||
CommentWeb-GroupViewFlagCommentWebGroupViewFlag | This field is not currently used. | ||||||
CommentWeb-GroupViewDisplay-ColumnsCommentWebGroupViewDisplayColumns | This field is not currently used. | ||||||
CommentWeb-GroupViewDisplay-RowsCommentWebGroupViewDisplayRows | This field is not currently used. | ||||||
TopicComment-WidthMMTopicCommentWidthMM | See CommentWidthMM above. Note: We recommend this field is set to match the settings of the relevant Crystal Reports, so that teachers entering comments can see how they will look when printed. | ||||||
TopicComment-LinesTopicCommentLines | See CommentLines above. Note: We recommend this field is set to match the settings of the relevant Crystal Reports, so that teachers entering comments can see how they will look when printed. | ||||||
TopicComment-FontNameTopicCommentFontName | See CommentFontName above. Note: We recommend this field is set to match the settings of the relevant Crystal Reports, so that teachers entering comments can see how they will look when printed. | ||||||
TopicComment-FontPointSizeTopicCommentFontPointSize | See CommentFontPointSize above. Note: We recommend this field is set to match the settings of the relevant Crystal Reports, so that teachers entering comments can see how they will look when printed. | ||||||
TopicComment-FontItalicFlagTopicCommentFontItalicFlag | See CommentFontItalicFlag above. Note: We recommend this field is set to match the settings of the relevant Crystal Reports, so that teachers entering comments can see how they will look when printed. | ||||||
TopicComment-FontBoldFlagTopicCommentFontBoldFlag | See CommentFontBoldFlag above. Note: We recommend this field is set to match the settings of the relevant Crystal Reports, so that teachers entering comments can see how they will look when printed. | ||||||
TopicComment-MaxCharactersTopicCommentMaxCharacters | See CommentMaxCharacters above. Note: We recommend this field is set to match the settings of the relevant Crystal Reports, so that teachers entering comments can see how they will look when printed. | ||||||
TopicComment-Words | See CommentWords above. Note: We recommend this field is set to match the settings of the relevant Crystal Reports, so that teachers entering comments can see how they will look when printed. | ||||||
PrintOverrideViewName | If the view differs from vStudentReportsSemester in the Crystal Report then it must be entered here so it works in the Community Portal and SynWeb. For example, vStudentReportsSemesterResults. | ||||||
ExcludeClassSelection | Select this field for the report style, for Synergetic to send all classes for a student to a single Crystal Report. Therefore the Crystal Report is responsible for its own grouping of the classes. Clear this field for Synergetic to pass the details of only one class at a time. This is used when printing leading and trailing reports. See PrintFlag above. Warning: Take care when changing existing settings. If in doubt speak to your Crystal Reports specialist. | ||||||
CommPortalMeaning | Determine how to display student reports on the Community Portal. Select LivePDF to allow users to generate and view a PDF version of the student's report. A PDF is a document in Adobe's Portable Document Format.
O_15707 | O_15707 |  Leave blank to allow users to only view their results on the HTML page. | ||||
SSRSReportExternal | The name of the SSRS report. Configure this field when printing SSRS reports. | ||||||
SSRSReportInternal | This field is not currently used. | ||||||
| SSRSFlag | Whether SSRS reports are enabled for the selected report. | ||||||
ModifiedDate | Date and time the lookup table entry was last modified. | ||||||
ModifiedUser | User that last modified the lookup table entry. |
.gif)
.gif)
...