Skip to end of banner
Go to start of banner

Printing WAAR results

Skip to end of metadata
  • Created by Former user, last modified by Former user on Jan 18, 2017
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Current »

To print the WAAR (Western Australia Assessment Reporting) results:

  1. Navigate to the luReportStyle lookup table. See luReportStyle lookup table in the System maintenance manual.
  2. Clear the PrintFlag fields for all normal reports.
  3. Navigate to the luYearLevelStudentReportsExtra lookup table. See luYearLevelStudentReportsExtra lookup table in the System maintenance manual.
  4. Add an entry for the WAAR report.
  5. Either:
    • select the PrintAfterFlag to print after the normal reports
    • clear the PrintAfterFlag to print before the normal reports.
  6. Print the report. See Printing student reports (on page ).
    The report is run as a single print job for each student.
    Note: If you have not processed the result calculations, the class is not be available for printing and the following message is displayed: Result calculations have not been performed for this year level.
  7. Navigate to the luReportStyle lookup table. See luReportStyle lookup table in the System maintenance manual.
  8. Select the PrintFlag fields for all normal reports.
  9. Navigate to the luYearLevelStudentReportsExtra lookup table. See luYearLevelStudentReportsExtra lookup table in the System maintenance manual.
  10. Clear the ActiveFlag for the WAAR report.

 

  • No labels